Focus On 3C Product SMD LED Lamp Beads

Class 10,000 Dust-Free WorkshopKK-Level Daily Output

contact us
Add: 168 Industrial Zone, Tangxia Town, Dongguan City
Tel: (+86)-769-8208 8519
Fax: (+86)-769-8219 6318
Mr.Honh: 138 0982 8229
Mr.Hong: 158 9967 8955
E-mail: dg-best@bestopto.com
Web: www.bestopto.com
Company News

How to detect and replace the LED lamp beads?

Source: Time:2019-11-16 17:57:27 views:

There is no change in the management method of distributed photovoltaic power generation projects: industrial and commercial distribution cannot choose to go online in full. Except for household distributed photovoltaics, which can choose the full-grid mode, other small distributed photovoltaic power generation.
There are two main reasons why the LED light is off:
One is the problem of light source, and the other is the problem of power supply. At present, the light source of LED lights is composed of LED lamp beads. First, disconnect the power supply at home, open the lamp cover, and use a multimeter to measure whether the LED light source is broken (the lamp beads are generally connected in series). If so, check Look at the style of the light source, go to Taobao to buy the same light source and replace it, there is a company called Qianhan, accessories are quite complete, pay attention to the voltage range of the light source when buying, you must buy a light source of the same voltage.
If you use a multimeter to detect that the light source is okay, then it depends on whether it is a power problem. Generally, LED ceiling lights use an external power supply method. Then you can buy a power supply to replace it. Some LED light manufacturers use a bad power supply. The power supply is the most prone to problems.


method one:

1. Before turning on the LED light, measure the voltage of the power supply and the current flowing through the LED.
2. Then take apart and check all the key parts one by one: driver or power supply, LED lamp beads, and replace all broken lamp beads.
3. Find out the cause of the LED lamp bead damage. If there is overcurrent, reduce the drive current immediately. Check if the driver is faulty, and also find out the reason, repairable and replaceable.
If the LED power supply is damaged, buy a power supply with the same parameters as voltage and current and replace it.
If the LED lamp is damaged more and the damaged LED patch lamp is concentrated in the same area, the damaged section can be cut and re-soldered.
If you have some basic knowledge of electronics, you can buy the same type of LED light, carry a soldering iron, and re-solder. But then again, there are many LED patch light elements on each LED light bar, one or two of which are bad, and have little effect on brightness.


Method Two:

1. If the LED power supply is damaged, buy a power supply with the same parameters as voltage and current and replace it.
2. If the LED lamp is damaged more and the damaged LED patch lamp is concentrated in the same area, the damaged section can be cut and re-welded.

3. If you have some basic knowledge of electronics, you can buy the same type of LED lamp, carry a soldering iron, and re-solder. But then again, there are many LED patch light elements on each LED light bar, one or two of which are bad, and have little effect on brightness.



Bestopto Electronics Shines For AI

Links
Copyright © 2019-2020 DongGuan Bestopto electronic Co.,LTD. Code:粤ICP备19047279号 百度统计 Website planning 谢松杰 东莞网站建设【东莞天助】